We have been producing dry ice for more than 12 years. From the very beginning, we have been intensively involved with our production facilities and have constantly adapted and improved them to our practical needs. The result of this was our first fully self-developed pelletizer five years ago.

The most important goals of our developments are reliability and ease of use. From the first in-house development, two series of pelletizers and two series converters have been created.

All components are manufactured and assembled in Germany. Our systems are robust, reliable and inexpensive. With minimal space requirements, they provide maximum performance. With only 4 KW connection value, they are economical in power consumption.


Pelletizer MBL-P-100 

Our MBL-P-100 pelletizer is the ideal entry-level model for anyone just starting dry ice production. Do you already produce dry ice but struggle with capacity bottlenecks? Then the P-100 is also the right choice for you. It is designed in such a way that it achieves maximum performance with minimum space requirements. This production machine can be ideally combined with RE80 recovery unit to increase the production volume while maintaining the same CO² requirement.

weight500 kg, Housing made of stainless steel
dimensions(WxLxH) 700 x 1100 x 1530 mm
production quantityapprox. 110 kg/h
pellet size1,7 mm – 16 mm*
CO2-inputG 1/2″ flat sealing with approx. 18 bar inlet pressure
power consumptionapprox. 4 kWh
operating voltage3 x 400 volts / 50 Hz
type of drive compressorhydraulic cylinder with approx. 12 to
electric outletCEE 16 A

*The size of the pellets / nuggets depends on the die used.


Pelletizer MBL-DP-200 

The MBL-DP-200 pelletizer, or more simply, our double pelletizer, achieves twice the production volume thanks to an optimized control and an additional press unit with the same energy consumption then our MBL-P-100. And that’s not all. Both press units can also be operated individually and with different dies. With this pelletizer, two different products can be operated at the same time and with the same space requirement as our entry-level model MBL-P-100. The MBL-DP-200 is ideally combined with the recovery unit RE160 for an optimal use of CO².

weight700 kg, Housing made of stainless steel
dimensions(W x L x H) 700 x 1100 x 1530 mm
pellet size1,7 mm – 16 mm*
CO2-inputG 1/2″ flat sealing with approx. 18 bar inlet pressure
power consumptionapprox. 4 kWh
operating voltage3 x 400 volts / 50 Hz
type of drive compressorhydraulic cylinder with approx. 12 to
electric outletCEE 16A

*The size of the pellets / nuggets depends on the die used.


Our special exchange service

If your pelletizer is defective, we will provide you with an exchange pelletizer during the repair time.
In this way, you have no production loss and can continue working without interruption.


Reformer MBL-UM-600

weight800 kg, Housing made of stainless steel
dimensions(W x L x H) 895 x 1495 x 1640 mm (1880 mm with funnel)
production quantityapprox. 700 kg/h, depending on the block size
block size(W x L x H) 100 x 200 mm, height variable up to 100 mm
block weight0,5 – 3 kg
power consumptionapprox. 4,8 kWh
operating voltage3 x 400 volts / 50 Hz
type of drive compressorhydraulic cylinder
electric outletCEE 16A

In order for the market to be tested without the customer immediately going into full investment risk, the reformer can first be rented for 6 or 12 months.

If the block production proves to be successful, the reformer can be purchased after deducting of the rental payments.

If the market does not justify this acquisition, the customer returns the converter after the rental period has expired and has no costs to bear.