We have been producing dry ice for more than 12 years. From the very beginning, we have worked intensively on our production equipment, constantly adapting and improving it to meet our practical needs. The result of this was our first completely self-developed pelletizer five years ago.

The most important goals of our developments are reliability and user-friendliness. From the first in-house development, two series of pelletizers and two series of converters have been created.

All components are manufactured and assembled in Germany. Our systems are robust, reliable and cost-effective. With minimal space requirements, they offer maximum performance. With only 4 KW connected load, they are economical in power consumption.


Our dry ice production machines are “Made in Germany”, from design to manufacturing and final assembly. Whenever possible, we use regional suppliers. However, we always make sure that our machines can be easily and inexpensively maintained and repaired abroad.


Pelletizer PT-P-100

Our PT-P-100 pelletizer is the ideal entry-level model for anyone just starting out in dry ice production. You already produce dry ice, but are struggling with capacity bottlenecks? Then the P-100 is also the right choice for you. It is designed to achieve maximum performance with minimum space requirements. This production machine can be ideally combined with the RE80 recovery unit to increase the production volume with the same CO² demand.

Weight500 kg, Stainless steel housing
Dimension(WxLxH) 700 x 1100 x 1530 mm
Production quantityca. 110 kg/h
Pellet size1,7 mm – 16 mm*
CO² input G 1/2 ″ flat sealing with approx. 18 bar inlet pressure
Power consumptionapprox. 4 kWh
Operating voltage3 x 400 Volt / 50 Hz
Drive typeHydraulic cylinder with approx. 12 to
Power connectionCEE 16 A

*The size of the pellets / nuggets depends on the die used.


Pelletizer PT-DP-200

The PT-DP-200 pelletizer, or more simply, our double pelletizer, achieves twice the production volume of our PT-P-100 with the same energy consumption thanks to its optimized control system and an additional press unit. And that’s not all. Both press units can also be operated individually and with different dies. With this pelletizer, two different products can be operated simultaneously and with the same space requirement as our entry-level model PT-P-100. The PT-DP-200 is ideally combined with the RE160 recovery unit for optimum CO² utilization.

Weight700 kg, Housing made of stainless steel
Dimension(WxLxH) 700 x 1100 x 1530 mm
Production quantityapprox. 210 kg/h
Pellet size1,7 mm – 16 mm*
CO² input G 1/2 ″ flat sealing with approx. 18 bar inlet pressure
Power consumptionapprox. 4 kWh
Operating voltage3 x 400 Volt / 50 Hz
Drive typeHydraulic cylinder with approx. 12 to
Power connectionCEE 16 A


Our special exchange service

If your pelletizer is defective, we will provide you with a replacement pelletizer during the repair period.
This means that you have no production downtime and can continue working without interruption.


Reformer PT-UM-600

Weight800 kg, Housing made of stainlee steel
Dimension(WxLxH) 95 x 1495 x 1640 mm (1880 mm with funnel)
Production quantityapprox. 600 kg / h, depending on the block size
Block size(W x L x H) 100 x 200 mm, height variable up to 100 mm
Weight blocks0,5 – 3 kg
Power consumptionapprox. 4,8 kWh
Operating voltage3 x 400 Volt / 50 Hz
Drive typeHydraulic cylinder
Power connectionCEE 16 A

In order to test the market without having to take the full investment risk immediately, the reformer can initially be rented for 6 or 12 months.

If the block production proves successful, you can buy the reformer after deducting the rental payments.

If the market does not justify this purchase, you simply return the reformer at the end of the rental period and have no further costs.